3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? four-wall header .100 .100 latch/ejector, straight and right angle d3000 series ? military (with 3ms 3518 & n3518 polarizing key) and centerbump polarization ? optional ejector latches ? mounting holes for securing header to board ? optional polarizing posts available ? high temperature insulator suitable for no lead soldering operations ? high temperature insulator in through-hole version suitable for paste in hole refow soldering ? rohs compliant. see the regulatory information appendix (ria) in the rohs compliance section of www.3mconnectors.com for compliance information (ria e1 and c1 apply) date modifed: may 21, 2012 ts-2245-f sheet 1 of 4 physical insulator: material: high temp glass filled polyester (pct) flammability: ul 94v-0 color: black (pct) contact: material: brass plating: underplating: 50 -150 ? [ 1.25 m ] ni wiping area: 15 ? [0.381 m] gold solder tails: 40 - 120 ? [ 1-3 m ] matte tin marking: 3m logo, part identifcation number and orientation triangle electrical current rating: 5.00 a, 1 contact powered 3.00 a, 6 contacts powered 1.75 a, all contacts powered rating conditions: eia-364-070 method 2, 30c maximum temperature rise, 20% derated. reference appropriate 3m product specifcation for detailed current derating curves. insulation resistance: >1 10 9 at 500 v dc withstanding voltage: 1,000 v rms at sea level environmental temperature rating: -55c to +105c process rating: 260c, profle per j-std-020c, single pass moisture sensitivity level: 1 (per j-std-020c) ul file no.: e68080
3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? four-wall header .100 .100 latch/ejector, straight and right angle d3000 series ts-2245-f sheet 2 of 4 - x 2 x x head e r w i t h s hort e jec t o r / lat c h f o r 3m socke t s wit hou t s t r a in relie f -x0 x x h e ader wit hou t l a t ch e j ect o r . 0 25 . 002 s q typ [ 0 . 64 ] posit i on 1 o r ient a t ion tri angl e . 2 1 [ 5 . 3 ] . 2 4 [ 6 . 1 ] . 3 0 [ 7 . 6 ] f t yp . 049 ref [ 1 . 24] . 100 ref [ 2 . 5 4 ] 2x ? . 100 [ 2 . 54] (see not e 2 ) a c .16 [ 4 . 1 ] notc h c ( s ee t able 1 & not e 1 ) n o tch b ( s ee t a ble 1 ) n o tch a ( s e e t a b l e 1 & n o t e 1 ) b b s e c t i on b - b (righ t angl e ) . 6 8 [ 1 7 . 3 ] . 3 5 [ 8 . 9 ] . 020 [ 0 . 5 1 ] a a f t yp section a-a ( s traight) dim. e . 3 0 [ 7 . 6 ] . 2 4 [ 6 . 1 ] . 025 . 002 s q t y p [ 0 . 6 4 ] c l ? y ? c l . 1 9 7 [ 5 . 00] . 2 0 [ 5 . 1 ] .42 4 . 010 [ 10. 77 ] .57 3 . 010 [ 14. 55 ] . 0 8 [ 2 . 0 ] . 97 ref [ 24. 6 ] . 0 8 [ 2 . 0 ] .37 ref [9. 4 ] . 46 ref [ 11. 7 ] 1 . 0 7 ref [ 27. 2 ] dim. e ? y ? . 1 2 [ 3 . 0 ] -x3x x hea d er with lon g e j ecto r / lat c h fo r 3 m s o cke ts with s t r a in relie f . 1 0 0 2 . 5 4 r e f . b . 2 5 6 . 4 . 34 8 . 6 . 2 8 7 . 1 d . 1 0 0 2 . 5 4 ref . p o s i t i o n #1 . 0 20 0. 51 . 1 3 3. 3 2 x o . 10 0 [ 2 . 5 4] s e e n o t e #2
3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? four-wall header .100 .100 latch/ejector, straight and right angle d3000 series ts-2245-f sheet 3 of 4 table 1 pin qty 3m part number dimensions polarizing notches a b c d 06 3869 1.065 (27.05) 0.905 (22.99) 0.665 (16.89) 0.505 (12.83) b* 08 3889 1.165 (29.59) 1.005 (25.53) 0.765 (19.43) 0.605 (15.37) b* 10 3793 1.265 (32.13) 1.105 (28.04) 0.865 (21.97) 0.705 (17.91) bc 14 3314 1.465 (37.21) 1.305 (33.12) 1.065 (27.05) 0.905 (22.99) bc 16 3408 1.565 (39.75) 1.405 (35.66) 1.165 (29.59) 1.005 (25.53) abc 20 3428 1.765 (44.83) 1.605 (40.74) 1.365 (34.67) 1.205 (30.61) abc 24 3627 1.965 (49.91) 1.805 (45.82) 1.565 (39.75) 1.405 (35.69) abc 26 3429 2.065 (52.45) 1.905 (48.36) 1.665 (42.29) 1.505 (38.23) abc 30 3440 2.265 (57.53) 2.105 (53.44) 1.865 (47.37) 1.705 (43.31) abc 34 3431 2.465 (62.61) 2.305 (58.52) 2.065 (52.45) 1.905 (48.39) abc 40 3432 2.765 (70.23) 2.605 (66.14) 2.365 (60.07) 2.205 (56.01) abc 50 3433 3.265 (82.93) 3.105 (78.84) 2.865 (72.77) 2.705 (68.71) abc 60 3372 3.765 (95.63) 3.605 (91.54) 3.365 (85.47) 3.205 (81.41) abc 64 3764 3.965 (100.71) 3.805 (96.62) 3.565 (90.55) 3.405 (86.49) abc * available without center notch b. contact 3m. inch (mm) .005 .1 .01 tolerance unless noted .0 .00 .000 [ ] dimensions for reference only table 2 3m part number suffx contact tail dim e pin cross section dimension g dim f diagonals corner radii -5xx2 solder tail for .062 [1.57] thick pc board .112 .010 [2.84] .0245 .0005 [0.622] .028 ..001 [0.71] .0075 ref [0.191] ?.035 .003 [0.89] (see note 3) -6xx2 notes: 1. notches a & c will accomodate 3m polarizing keys (3m part #3518 or #n3518). 2. mounting hardware: from solder side of pc board use #4-24 thread cutting screw (3m part # 3341-5) and .116 [2.95] dia mounting hole. for right angle version only, #2-56 bolt and nut (3m part # 3341-6) with .106 [2.69] dia mounting hole may be used. see illustrations on page 4. 3. contact your 3m sales representative for custom requirements. c l "y" . 4 1 [ 10. 4 ] max t o e d ge o f p c b for daisy chai n ? . 106 [ 2 . 69] o r ? . 116 [ 2 . 95] (see not e 2 ) . 029 [ 0 . 74] .10 0 . 0 0 3 [2. 5 4 ] p o s i tio n 1 . 232 [ 5 . 8 9 ] c recommend ed moun t i ng hole p a ttern (righ t angl e ) . 1 0 0 . 003 [ 2 . 5 4 ] dim g ? . 106 [ 2 . 69] o r ? . 1 1 6 [ 2 . 95] ( s ee not e 2 ) p o sit i o n 1 . 100 . 003 [ 2 . 54] .10 0 . 0 0 3 [2. 5 4 ] . 060 [1. 5 2 ] . 3 0 0 [ 7 . 62] s i de t o s i de s t ackabili t y b r e commend ed mountin g hole pattern (st r a i ght) .35 2 [ 8 . 9 4 ] c l ? y ? dim g ordering information d3xxx - xx02ar pin confguration 5 = right angle solder tails 6 = straight solder tails 3m part number (see table 1) latch/ejector system 0 = no latch/ejector installed 2 = short roll pin latch/ejectors 3 = long roll pin latch/ejectors tail 02 = for .062 [1.57] thick board
3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? four-wall header .100 .100 latch/ejector, straight and right angle d3000 series ts-2245-f sheet 4 of 4 . 3 2 1 [ 8 . 15] . 1 00 dia [ 2 . 5 4 ] polariz i ng post note : i nsert p o s t int o one moun tin g h ardwa re hole o n bot t o m o f head er. s e t p o s t t o pro t r ude . 1 1 5? [2.92] 3 201 - 4 l c p b l a c k polarizing keys . 1 5 [ 3 . 8 ] . 0 9 [ 2 . 3 ] a b r e a k a w a y t a b . 3 4 r e f [ 8 . 6 ] not e : # 2216 b / a s cot c hweld c an b e used t o adhe re k e ys. d i m a n 3 5 1 8 l c p b l a c k . 0 2 3518 p b t g r a y . 0 2 mounting hardware . 3 1 [ 7 . 9 ] . 5 0 [ 12. 7 ] p a nhea d thr ead cut t i n g screw: # 4 -24 x 5 / 1 6? type: u s a s t d b t , federa l b g hex hea d b o l t, nut a nd w asher b o l t - #2- 56 x 1 / 2? 3341- 5 ( i nstal l ed f r om b o t t om o f b oard ) 3 341- 6 (must b e i n s e rte d p rior t o lat c h o n v e rti c a l h eade rs) 3 341-5 & 6 m a ter i al - sta i nless s t eel polarizing keys n3518 lcp black .02 part customization this spec sheet details our standard offering. 3m has several capabilities that can provide a part tailored to your specifc needs. ask your 3m sales representative or customer service for more details. ? the -2 & -3 roll pin latches (may be ordered separately with roll pins included) ? snap-in style latch/ejectors in either short (n3xxxx5xxx) or long (n3xxx-x6xx) styles, may also be ordered separately, and are functional and dimensional equivalents to the -2 and -3 roll pin latches. if ordering latches separately, please use the below chart short latch long latch latch style color high temperature (ppa) n3505-30b n3505-31b snap in black high temperature (pct) n3505-2b n3505-3b roll pin black ? selective pin removal (ata or other compatability) , accessories
important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized offcer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. please recycle. printed in usa. ? 3m 2012. all rights reserved. ria-2217b-e 3 3m electronics solutions division 6801 river place blvd. austin, tx 78726-9000 u.s.a. 1-800-225-5373 www.3mconnectors.com 3m is a trademark of 3m company.
|
